No Product In Inquiry List
No Product In Inquiry List
- DT52 drill taper series is NOT sold with full set. The taper holder, collet and sleeve must be ordered separately.
- The drill taper holder could be adjusted the torque with HIGH or LOW according to the tapped material.
- When ordering tap collet, please specify shank diameter (Ød) and square size (SQ/ □ ).
| Model No. | Weight (kg) | |
|---|---|---|
| Taper Holder | DT52 MTA5 Holder | 7.00 |
| Tap Collet | M24,M27,M30,M33,M36,M39,M42, M45,M48,M52 |
2.30 |
| W1,W1-1/8,W1-1/4,W1-3/8, W1-1/2,W1-5/8,W1-3/4,W1-7/8,W2 |
||
| Sleeve | DT52-MT2 | 2.20 |
| DT52-MT3 | 2.20 | |
| DT52-MT4 | 2.20 | |
| DT52-MT5 | 1.70 | |
DT52 Taper Collet Specification
| JIS | Ød | □ |
|---|---|---|
| DT52 M24 M25 | 19 | 15 |
| DT52 M27 W1 PT5/8 | 20 | 15 |
| DT52 M30 PT3/4 | 23 | 17 |
| DT52 M32 W1-1/4 PT7/8 | 24 | 19 |
| DT52 M33 | 25 | 19 |
| DT52 M34 M35 W1-3/8 PT1 | 26 | 21 |
| DT52 M36 PT1-1/8 | 28 | 21 |
| DT52 M39 M40 W1-1/2 | 30 | 23 |
| DT52 M42 W1-5/8 | 32 | 26 |
| DT52 M45 M46 W1-3/4 PT1-3/8 | 35 | 26 |
| DT52 M48 W1-7/8 PT1-1/2 | 38 | 29 |
| DT52 M50 W2 | 40 | 32 |
| DT52 M52 | 42 | 32 |
| DT52 W1-1/8 | 22 | 17 |
| ISO | Ød | □ |
|---|---|---|
| DT52 M24 | 18 | 14 |
| DT52 M27 M30 | 20 | 16 |
| DT52 M33 | 22.4 | 18 |
| DT52 M36 | 25 | 20 |
| DT52 M39 M42 | 28 | 22.4 |
| DT52 M45 M48 | 31.5 | 25 |
| DT52 M52 | 35.5 | 28 |
| DIN376 | Ød | □ |
|---|---|---|
| DT52 M27 | 20 | 16 |
| DT52 M30 | 22 | 18 |
| DT52 M33 | 25 | 20 |
| DT52 M36 | 28 | 22 |
| DT52 M39 M42 | 32 | 24 |
| DT52 M45 M48 | 36 | 29 |
| DT52 M52 | 40 | 32 |
