Belum Ada Produk Di List Inquiry
Belum Ada Produk Di List Inquiry
Solid Carbide Endmills Corner Radius from Diameter D1.0 - D12
Helix Angle 35
2 Flutes
HRC up to 55
Difficult material and general steel (Wet and MQL cutting)
| Type No. | Diameter | Corner R | Flute Length | O.A.L | Shank Dia. |
|---|---|---|---|---|---|
| D1 | R | L1 | L3 | D2 | |
| RTG0102 | 1.0 | 0.2 | 3 | 50 | 4 |
| RTG0152 | 1.5 | 0.2 | 4 | 50 | 4 |
| RTG0202 | 2.0 | 0.2 | 6 | 50 | 4 |
| RTG0205 | 2.0 | 0.5 | 6 | 50 | 4 |
| RTG0252 | 2.5 | 0.2 | 8 | 50 | 4 |
| RTG0255 | 2.5 | 0.5 | 8 | 50 | 4 |
| RTG0302 | 3.0 | 0.2 | 8 | 50 | 4 |
| RTG0303 | 3.0 | 0.3 | 8 | 50 | 4 |
| RTG0305 | 3.0 | 0.5 | 8 | 50 | 4 |
| RTG0402 | 4.0 | 0.2 | 11 | 50 | 4 |
| RTG0403 | 4.0 | 0.3 | 11 | 50 | 4 |
| RTG0405 | 4.0 | 0.5 | 11 | 50 | 4 |
| RTG0503 | 5.0 | 0.3 | 13 | 50 | 6 |
| RTG0505 | 5.0 | 0.5 | 13 | 50 | 6 |
| RTG0602 | 6.0 | 0.2 | 16 | 50 | 6 |
| RTG0603 | 6.0 | 0.3 | 16 | 50 | 6 |
| RTG0605 | 6.0 | 0.5 | 16 | 50 | 6 |
| RTG0610 | 6.0 | 1.0 | 16 | 50 | 6 |
| RTG0803 | 8.0 | 0.3 | 20 | 60 | 8 |
| RTG0805 | 8.0 | 0.5 | 20 | 60 | 8 |
| RTG1002 | 10.0 | 0.2 | 25 | 75 | 10 |
| RTG1003 | 10.0 | 0.3 | 25 | 75 | 10 |
| RTG1005 | 10.0 | 0.5 | 25 | 75 | 10 |
| RTG1010 | 10.0 | 1.0 | 25 | 75 | 10 |
| RTG1203 | 12.0 | 0.3 | 30 | 75 | 12 |
| RTG1205 | 12.0 | 0.5 | 30 | 75 | 12 |
| RTG1210 | 12.0 | 1.0 | 30 | 75 | 12 |
| RTG1215 | 12.0 | 1.5 | 30 | 75 | 12 |
| RTG1220 | 12.0 | 2.0 | 30 | 75 | 12 |
